× Yes! We are OPEN and SHIPPING! Click for info about possible shipping delays: Learn More

Spicer 5-799X U Joint

$21.99
MSRP: $31.75
Your Savings: $9.76 (30.74%)
SKU: SPI5-799X
Qty:

Spicer 5-799X U Joint

Spicer Parts & DANA

Part of the Spicer Life series of replacement parts, these solid u-joints never need greasing due to the bevelled trunion and triple lip seal that is incorporated in the bearing cap. This design also eliminates water contamination. These come pre-greased with a high quality grease and are non-greasable for higher strength than hollow bodied greasable joints.

These are used in the double cardan joint in the front driveshaft used in most 06-up Dodge Ram 2500/3500 trucks with the AAM 9.25 front axle(2 Required

These have a bearing cap diameter of 1.188. You will need to measure the bearing cap diameter in you truck to verify fitment. If your truck uses the 1.062 size bearing caps then you will need to order the 5-790X joints listed in related products.

Specifications:

  • G1) Snap Ring Dim. 3.625
  • D1) Bearing Cap Dia. 1.188
  • G2) Snap Ring Dim. 3.625
  • D2) Bearing Cap Dia. 1.188
  • OEM Mfg. SPICER
  • OEM Series 1350

Customer Reviews

Overall:
Reviewed by Steve , 09/26/2011

Dana Spicer quality is evident in all these joints. Watch out for the ball and socket in the middle of your double cardan joint, it's easy to mess up if you try to remove the old caps the usual way. Take out the driveshaft and yoke caps first. Then you can tap the caps on the carrier about half way out and wiggle the trunnion (cross) out of the way. Finish tapping them out from the back or you might damage the seal and center ball socket.

Shop By Brand

Shopping Cart

Shopping Cart Empty