Dynatrac 2012+ Dodge 2500/3500 Free Spin Hub kit with Dynaloc hubs

When factory specs don't cut it!

No matter how you use your truck, the engineers at Dynatrac understand that the measure by which all parts are judged is strength and performance. From light duty to extreme use, your vehicle should be built for reliability and endurance under any conditions. And all too often, the original equipment falls short.

As an industry leader, Dynatrac has taken up the challenge of building the better truck. Designed specifically to remove a weak link in popular Dodge Ram 4x4 trucks, Dynatrac’s Free-Spin Heavy Duty Hub Conversion Kits replace the factory unit bearings with fixed spindles for superior strength, improved fuel economy, and smooth performance. The complete kit includes inexpensive, serviceable Timken bearings, cromoly spindles, cast nodular wheel hubs, Warn Premium manual locking hubs, and massive 1.50” diameter, 35-spline outer axle shafts. All made in the USA.

This combination of parts has been designed and tested to provide the best longevity and reliability under the most severe use. While the factory unit bearing is non-serviceable and prone to failure, the Free-Spin hub conversion offers ease of maintenance, a much smoother ride, better steering control, greater fuel economy, and longer axle and driveshaft life. Advantages that add up to tremendous cost savings over the life of your vehicle.

When a unit bearing fails, the vehicle is often immediately disabled and cannot be driven anywhere until the unit bearing has been completely replaced. That means towing, downtime, expensive dealer repairs and a ruined vacation or lost revenue for a work truck.

For recreational truck enthusiasts, the Free-Spin hub conversion eliminates a weak link that could easily leave you stranded. For commercial truck owners and fleet managers, who rely on their rigs 24/7 to get the job done, the Free-Spin hub conversion ensures that your trucks are on the road making you money. Improved Fuel economy and smoother performance is an additional bonus.

U-Joints

Now is a great time to get at your U-Joint as well. Easily add the U-Joint you need to this order by selecting the correct U-Joint right up near the "Add to Cart" button. This means FREE SHIPPING on your free spin kit and U-joint!

• 10 - 12 Dodge Ram - Spicer 5-3212X U Joint

This kit includes the upgraded Dynaloc Hubs with the following features:

• 3-times stronger than other Dana 60 Locking Hubs
• First truly new locking hub design in 20 years
• Gears MADE IN USA from heat-treated, chromoly steel
• Unique gear tooth design won’t disengage under high torque load
• Low profile knob assembly decreases impact with rocks and obstacles
• Attractive stainless steel bezel resists impact and scrapesalong rocks
• Defaults to locked position for reliable operation
• Requires a 1/8 of a turn to engage

Application:

• 2012 Dodge 2500/3500 4WD trucks
• 2013 - 2018 Dodge 2500/3500 4WD trucks with wheels that have removeable center caps

The Dynatrac 2012 Dodge Ram Free Spin Hub Conversion Kit will fit all 2013-2018 Dodge Ram 2500/3500 4x4 vehicles. However, due to changes to the wheels, most OE wheels will not fit. The issue is the wheels are closed and do not have a removable center cap, which is required to allow the hub snout to pass through.

Example

Dodge 3500 dually fitment information:

Dually trucks installing the Free Spin Kit require new wheel adapters purchased directly from Arrowcraft.
Arrowcraft
(248)280-0210

Benefits:

• Manual-locking hubs reduce wear and increase fuel economy by preventing parts from rotating constantly during 2WD operation.
• Increases reliability by eliminating troublesome axle disconnect operation.
• Lower cost of ownership – Wheel bearings and seals are dramatically cheaper to maintain, and can be easily serviced for longer life, even under severe conditions.
• Dramatic increase in axle strength and reliability with 35-spline 1.50” shafts.

2012+ Dodge Free-Spin Heavy-Duty Hub Conversion includes:

• 2) 8 on 6.5 Dynatrac wheel hubs (customer to re-use rotor)
• 2) Dynatrac Heavy-duty spindle kits
• 2) Dynatrac Heavy-duty, 35-spline, outer axle shafts
• 1) Set of Warn Premium manual locking hubs (35-spline)
• 1) Set of user serviceable wheel bearings, races and seals
• 1) Set of ABS tone rings and sensor mounts

All kits include inner and outer wheel bearings, races, seals, hardware and complete instructions

Part Number

• CR60-3X1104-L