× Yes! We are OPEN and SHIPPING! Click for info about possible shipping delays: Learn More

Dynatrac Free-Spin HDHC Dodge Stage I - '00-'08 2500/3500 w/ABS & Dynalocs

$2,644.00 - $2,772.00

SKU: DYNCR60-3X1104-E
Availability: Email for Lead Time
Add U-Joint?:


Eligible for FREE Shipping

Dynatrac Free-Spin HDHC Dodge Stage I - '00-'08 2500/3500 w/ABS & Dynaloc's

Dynatrac 8Lug Free Shipping

When factory specs don't cut it!

No matter how you use your truck, the engineers at Dynatrac understand that the measure by which all parts are judged is strength and performance. From light duty to extreme use, your vehicle should be built for reliability and endurance under any conditions. And all too often, the original equipment falls short.

As an industry leader, Dynatrac has taken up the challenge of building the better truck. Designed specifically to remove a weak link in popular Dodge Ram 4x4 trucks, Dynatrac’s Free-Spin Heavy Duty Hub Conversion Kits replace the factory unit bearings with fixed spindles for superior strength, improved fuel economy, and smooth performance. The complete kit includes inexpensive, serviceable Timken bearings, cromoly spindles, cast nodular wheel hubs, Warn Premium manual locking hubs, and massive 1.50” diameter, 35-spline outer axle shafts. All made in the USA.

This combination of parts has been designed and tested to provide the best longevity and reliability under the most severe use. While the factory unit bearing is non-serviceable and prone to failure, the Free-Spin hub conversion offers ease of maintenance, a much smoother ride, better steering control, greater fuel economy, and longer axle and driveshaft life. Advantages that add up to tremendous cost savings over the life of your vehicle.

When a unit bearing fails, the vehicle is often immediately disabled and cannot be driven anywhere until the unit bearing has been completely replaced. That means towing, downtime, expensive dealer repairs and a ruined vacation or lost revenue for a work truck.

For recreational truck enthusiasts, the Free-Spin hub conversion eliminates a weak link that could easily leave you stranded. For commercial truck owners and fleet managers, who rely on their rigs 24/7 to get the job done, the Free-Spin hub conversion ensures that your trucks are on the road making you money. Improved Fuel economy and smoother performance is an additional bonus.


Now is a great time to get at your U-Joint as well. Easily add the U-Joint you need to this order by selecting the correct U-Joint right up near the "Add to Cart" button. This means FREE SHIPPING on your free spin kit and U-joint!


  • 2000-2008 Dodge Ram 2500/3500 4WD trucks

Trucks with dual rear wheels will require the use of a special dually wheel adapter. These can be purchased through Arrowcraft. (248)-280-0210 Ask for part number AA4DDT as these parts have been made to work specifically with Dynatrac’s Free-Spin kit.


  • Manual-locking hubs reduce wear and increase fuel economy by preventing parts from rotating constantly during 2WD operation.
  • Increases reliability by eliminating troublesome axle disconnect operation.
  • Lower cost of ownership – Wheel bearings and seals are dramatically cheaper to maintain, and can be easily serviced for longer life, even under severe conditions.
  • Dramatic increase in axle strength and reliability with 35-spline 1.50” shafts.

00-08 Dodge Free-Spin Heavy-Duty Hub Conversion Stage I Kit includes:

  • 2) 8 on 6.5 Dynatrac wheel hubs (customer to re-use rotor)
  • 2) Dynatrac Heavy-duty spindle kits
  • 2) Dynatrac Heavy-duty, 35-spline, outer axle shaft
  • 1) Set of Warn Premium manual locking hubs (35-spline
  • 1) Set of user serviceable wheel bearings, races and seals
  • 1) Set of ABS tone rings and sensor mounts (‘00 and newer only)

All kits include inner and outer wheel bearings, races, seals, hardware and complete instructions

Part Number

  • CR60-3X1104-E

Customer Reviews

Reviewed by Sohosky , 06/10/2014

Purchased this kit for an 08 Dodge 2500 with diesel engine.
Kit shipped promptly and installed perfectly. all parts american cast and work of art. worst part of install was pressing old inner
shafts off, for reuse. I would recommend. will check back with updates. Thanks for the great service...

Reviewed by JamesB , 05/26/2010

First Thanks to George for his knowledge and time in answering all my questions

Dynatrac lives up to their reputation with this kit, very well engineered and machined parts. Removal of the stock components the most difficult aspect of the job. My 07 2500 CTD feels tighter and more solid than stock and the 4 wheel system engages perfectly. I run my truck on the beach often and it feels like it pulls through the softest sand better. Couple this kit with the Prosteer ball joints and you have a better than new very stout front axle....

Reviewed by Greg D, 02/11/2010

Purchased for an '06 Dodge Power Wagon. The kit is everything that Dynatrac states and more! An absolute perfect fit, right out of the box. An easy bolt-on install, the toughest part being the teardown. 1.3 mpg increase on the first tank full and no "wear-n-tear" on the front end. Dynatrac has done an exceptional job of and engineering and machining, with 8LUG Truck Gear on top of everything with sales and service. THANKS GEORGE!

Shop By Brand

Shopping Cart

Shopping Cart Empty