S&B 2010-2012 Ram 2500 / 3500 L6-6.7L Cummins Cold Air Intake Kit(Dry Filter)

Applications:

• 75-5092D | 2010-2012 Ram 2500 / 3500 L6-6.7L Cummins trucks

Nothing but perfection

In 2010, Dodge made some changes to the engine compartment. While some say their '09 kits are 'close enough' with regards to fitment, 'close' does not meet S&B's standards which is why developed a new kit that will give you that great fit you have come to expect along with unsurpassed performance. Since we manufacture almost everything in house, we are able to provide all this value for only $289.

The Scoop
Want even cooler air? S&B's Ram Air Scoop mounts just below the bumper to provide the housing with cool, pressurized air. S&B tests to the SAE J2554 Water Spray Removal Test Standard to protect your engine from water. These results will be posted when the product is released.

A Snow Plug will be available to allow you to prepare for winter without having to remove the entire scoop. Scoop and Snow Plug sold separately.

Airflow Rating: Flows 49.3% better than the OE Induction System at Vehicle's Rated Flow (621 cfm)

Efficiency Rating:  99.81% Efficient - ISO Course Dust

S&B Filters Are Backed By A 1 Million Mile Limited Warranty

S&B diesel performance intake kits are all about improving airflow to your truck's engine. It's just a matter of superior design. Better airflow translates into a noticeable increase in power, acceleration and most importantly...bragging rights. S&B's intake kits are engineered to improve the airflow to your car's engine. It starts with years of research and development, as well as the most technically advanced testing. S&B tests to the ISO 5011 Air Filtration Standard in a climate – controlled lab when designing and testing our intake kits. This is the same technology used by Ford, Chrysler and General Motors to design the original induction system that comes on your vehicle.

Airflow

It all starts with airflow. The more air that your engine breathes, the more oxygen it receives. More oxygen results in a better combustion. Better combustion translates into more power and better fuel economy. This is why your vehicle runs better on cool mornings than on hot afternoons as cool air is denser and contains more oxygen. You can feed your engine more oxygen by reducing the restriction of the airflow.

S&B Thorough Research & Development

During our ISO 5011 testing, we first measure the restriction of the airflow through your vehicle's original induction system in order to establish a baseline. The goal of a Performance Intake Kit is to reduce the restriction of the airflow to your vehicle's engine. In layman's terms, we want to make it easier for the engine to breathe. By reducing the restriction of the airflow, your engine will have better throttle response and produce more horsepower and torque. Since your engine will not have to work as hard to produce the required amount of power – the result is better fuel economy.

S&B Backs It Up: Certified Test Results

S&B provides ISO 5011 Certified Test Results for its intake kits, so you can see exactly how much the airflow was improved (restriction decreased) as well as the efficiency of the filter. ISO is a worldwide federation of national standards bodies. The work of preparing International Standards is normally carried out through ISO technical committees. The specific individual International Standard utilized by S&B and automotive manufacturers establishes and specifies uniform test procedures, conditions, equipment, and a performance report to permit the direct laboratory performance comparison of air cleaners, in this case, those used on internal combustion engines and compressors used in automotive and industrial applications.

Breathe easy. Your engine & warranty are protected.™

Add power and fun while still protecting your investment.

Pull in more air with our large secondary inlet.

The secondary inlet lowers the restriction level, resulting in better performance.

Stronger, Better Silicone Parts

Silicone is a premium rubber that can withstand temperatures up to 400°F and won't crack or tear with age. It's tough yet elastic enough to stretch, then snap into a perfect seal.

Keep out unwanted engine heat.

Our one piece air box design features an integrated box seal that keeps out unwanted engine heat. The cooler the air, the greater the density, resulting in better performance.

Fit and finish are second to none.

The 75-5092 intake provides amazing airflow, solid protection and looks great installed on a 2010-2012 Dodge Ram Cummins.